2013 John Deere 1025R

$14,700.00

$14,700.00

Overview

New/Used Used
Usage780 Hours
Availability In Stock
LocationRuhl's Repair
Condition Good

Product Features

Dealer Notes
2013 John Deere 1025R Compact Tractor
60" Auto Connect Drive Over Mower Deck
24hp. Yanmar Engine
780 Hours
H120 Quick Attach Loader with Quick Attach Bucket
4x4
Cat 1, 3 Point Hitch
Suspension Seat
Very Clean Tractor!
Fully Serviced!
Warranty through April 30, 2025!

$14700 + tax
Financing available!

Description

Meet the most capable sub-compact tractors on the market: the John Deere 1 Family. With up to 25 available horsepower, AutoConnect™ decks, iMatch™ compatibility, not to mention hundreds of implement and attachment options...even the hardest chore on your list doesn't stand a chance.

  • Powerful Tier 4-compliant diesel engine
  • Premium Operator Station with ergonomic seat, armrests and fender lights
  • Easy-to-operate two speed hydrostatic transmission
  • Standard 4-wheel drive and power steering
Key Features
  • The 1025R operator's station has been designed to allow for greater operator comfort and increased visibility. Large and easy to grab handrails are located on each fender for an easier on and off of the tractor from either side.
  • Both 4WD and power steering are standard equipment on the 1025R. This combination allows for excellent maneuverability and ease of operation of the tractor.
  • Optional iMatch™ Quick-Hitch allows for easy implement hookup.
  • Strong hydraulics: Standard dual mid-selective control valve (SCV) with integrated loader joystick
  • Power is provided by a durable and efficient high-torque three-cylinder Yanmar® TNV Series diesel engine.
  • Hydrostatic transmission (HST) with Twin Touch™ foot controls.
  • Implement compounding improves efficiency: Allows mounting more than one implement at a time, eliminating implement changeover. Loader, mid-mower, and a variety of 3-point hitch implements can be attached to the tractor at the same time.
  • Fast and easy implement changeover: Front Quik-Tatch™ hitch makes changing front implements quick and easy.
Specifications
  • Manufacturer: Yanmar 3TNV80
  • Engine power 97/68/EC rated power (gross), hp (kW): 24.2 (17.8), PS
  • PTO power - Hydrostatic transmission, hp (kW): 18 (13.4) per SAE
  • Rated engine speed, rpm: 3200
  • Type: Diesel
  • Operating range: 1575-3370
  • Aspiration: Natural
  • Cylinders/displacement, cu in. (L): 3 / 68 (1.115)
  • Cylinder liners: Cast-In-Block
  • Bore and stroke, mm (in.): 76x82 (2.99x3.23)
  • Compression ratio: 23.5:1
  • Lubrication: Pressurized
  • Cooling system: Water pump
  • Air cleaner: Dry type with safety element
  • Engine shutoff: Key switch
  • Engine torque @ rated speed, lb-ft (N/m): 40.7 (55.2)
  • Fuel tank capacity (open-station; cab), U.S. gal. (L): 5.6 (21.2)
  • Type: 12V
  • Battery size (CCA): 500
  • Alternator (12-V), amp: 40
  • Starter size, hp (kW): 1.6 (1.2)
  • Type: Diesel
  • Injection pump type: Indirect Injection
  • Consumption at 100% load, U.S. gal./hr (L/hr): 1.4 (5.3)
  • Standard transmission; forward/reverse: Hydrostatic - 2 range
  • Left-hand reverser: No
  • Direction reverser; forward/reverse: No; Twin Touch Pedals
  • Final drive: Spur gear
  • Brakes: Wet disk (left hand pedal)
  • Steering: Power
  • Axle capacity (in operation): Front, lb (kg): 1253 (568)
  • Axle capacity (in operation): Rear, lb (kg): 2078 (942)
  • Creeper: No
  • Type: Open Center
  • Pump rated output, gpm (L/min): 6.3 (24)
  • Steering: 2.8 (10.8)
  • Implement: 3.5 (13.2)
  • Pump type: Gear
  • Maximum operating pressure (psi): 2000
  • Draft control type: Position Control
  • Remote control valves available: 2
  • Type: Limited Cat. 1
  • Lift capacity, 24-in. behind link arms, lb (kg): 681 (309)
  • Lift capacity at lift link ends, lb (kg): Standard: Rear @ 540; Mid @ 2100
  • Control: Independent
  • Clutch: Wet disk
  • Brake (for mid and rear PTO): Wet disk
  • Fuel tank, gal. (L): 5.6 (21.2)
  • Cooling system (includes coolant bottle), qt (L): 2.9 (2.7)
  • Crankcase with filter, qt (L): 3.9 (3.7)
  • Transmission and hydraulic system hydrostatic, gal. (L): 3.25 (12.3)
  • Front axle gearcase (MFWD axle), gal. (L): .625 (2.5)
  • Type: Spur Gear
  • Engage on-the-go rear differential lock: Yes
  • Rollover protection structure: OSHA, SAE, ASAE, EEC
  • Type: Foldable
  • Platform - Flat/straddle: One-piece semi flat
  • Gear shift location - Console/floor: Left Hand Side
  • Wheelbase, in. (mm): 57.1 (1450)
  • Front tread range, in. (mm): 36.1 (918)
  • Front axle clearance, in. (mm): 7.7 (195)
  • Turning radius without brakes, ft (m): 7.4 (2.25)
  • Approximate shipping weight (open-station; cab), lb (kg): 1444 (655)
  • Front: 18x8.5-10 R4
  • Rear: 26x12-12 R4
  • Underhood muffler: Yes
  • Joystick SCV control: Yes
  • Inboard planetary: No
  • Axle type: Flanged
  • Brakes - Type and control: Wet Disk
NOTES:
Fuel consumption rate should be used for comparison purposes only.

Engine

Engine Manufacturer Yanmar 3TNV80
Engine Type Diesel, 3-cylinders, 68 cu.in. (1.115 L), Natural Aspiration
Horsepower 24.2 hp (17.8 kW)
PTO HP 18 hp (13.4 kW)
Rated RPM 3200 rpm
Bore and Stroke 2.99 x 3.23 in. (76 x 82 mm)

Specifications

Wheelbase 57.1 in. (1450 mm)
Weight 1444 lb. (655 kg)
Ground Clearance 7.7 in. (195 mm)
Tire Size Front: 18x8.5-10 R4; Rear: 26x12-12 R4

General

Fuel System Indirect Injection
Fuel Capacity 5.6 gal. (21.2 L)
Transmission Hydrostatic - 2 range
Brakes Wet Disk
Hydraulics Type: Open Center; Pump Rated Output: 6.3 gpm (24 L/min.)
Drive Type MFWD

Shopping Tools