2008 John Deere 2320 4WD
$15,900.00
Shopping ToolsTools to help you in your buying process.
$15,900.00
Overview
New/Used Used
Usage310 Hours
Availability
In Stock
LocationRuhl's Repair
Condition
Excellent
Product Features
Dealer Notes
2008 John Deere 2320 Compact Tractor
24hp. Yanmar Diesel Engine
200CX Loader with 49" Quick Attach Bucket
54D Drive Over Mower Deck
Only 310 Hours!
4x4
R4 Tires
Very Nice Condition! Super clean, low hour, pre-emissions compact tractor!
Fully Serviced!
30 Day Warranty!
$15900 + tax
Financing available!
24hp. Yanmar Diesel Engine
200CX Loader with 49" Quick Attach Bucket
54D Drive Over Mower Deck
Only 310 Hours!
4x4
R4 Tires
Very Nice Condition! Super clean, low hour, pre-emissions compact tractor!
Fully Serviced!
30 Day Warranty!
$15900 + tax
Financing available!
Description
Power
- 3-Cylinder Yanmar diesel engine
- 24 horsepower
- Differential lock increases traction and pulling power
Performance
- Hydrostatic transmission (HST) provides infinite speed selection without clutching or shifting required for direction changes
- Independent mid and rear PTO (no clutching) can be engaged or disengaged while machine is stopped or on-the-go
- Standard 4-wheel drive
Comfort
- Power steering provides optimum performance in all operating conditions, especially when tractor is equipped with a loader
- Patented, ergonomic Twin Touch™ two-pedal foot control
- Cruise control is standard equipment
- High-backed contoured seat is suspended for added operator comfort
- Dial in the height of cut with the mid-rockshaft knob
Reliability
- Wet-disk brakes
Safety
- Roll-Gard™ ROPS and seat belt ensure operator safety
Versatility
- Category 1 3-Point Hitch
- Optional iMatch™ Quick Hitch
Engine
- Manufacturer: Yanmar 3TNV76
- Engine HP - gross: 24.1 hp (17.7 kW)
- PTO HP (kW) - Hydrostatic transmission: 18.0(13.4)
- Rated engine speed, rpm: 3000
- Type: Diesel
- Operating range: 1270-3170
- Aspiration: Natural
- Cylinders/Displacement, cu. in. (liters): 3 / 68 (1.115)
- Cylinder Liners: Cast-in-block
- Bore and Stroke, mm (in.): 76x82 (2.99x3.23)
- Compression Ratio: 23.4:1
- Lubrication: Pressurized
- Cooling System: Water pump
- Air Cleaner: Dry-type, two stage
- Engine Shutoff: Key switch
- Engine Torque @ rated speed, ft./lb. (N/m): 40.27 (54.6)
- Fuel Tank Cap., US Gal. (L) (Open; Cab): 6.1 (23); NA
Electrical
- Type: 12 volt
- Battery Size (CCA): 500
- Alternator (12 volt, amp): 20
- Starter Size, hp (kW): 1.6 (1.2)
Fuel System
- Injection Pump Type: Indirect Injection
- U.S. gal./hr (L/hr) @ 100% load: 1.6 (6.1)
Transmission
- Std. Transmission; Forward/Reverse: Hydro; 2 Range
- Left-Hand Reverser: No
- Direction Reverser; Forward/Reverse: Twin Touch pedals
- Final Drive: Spur gear
- Brakes: Wet disk
- Steering: Power steering
- Drawbar Tongue Weight Capacity, lb. (kg): 562 (255)
- Front, lb. (kg): 1940 (880)
- Rear, lb. (kg): 2426 (1100)
- Creeper: No
Hydraulics
- Type: Open Center
- Pump Rated Output, gpm (L/min.): 5.6 (21.2)
- Steering: 2.2 (8.5)
- Implement: 3.4 (12.7)
- Pump Type: Gear
- Maximum Operating Pressure (PSI): 2421
- Draft Control Type: Position Control
- Remote Control Valves Available: 2
3-Point Hitch
- Type: Category I
- Lift Capacity (24-in. behind link arms), lb. (kg): 1150 (522)
- Lift Capacity @ lift link ends, lb. (kg): 1433 (650)
Power Take-Off (PTO)
- Standard: Standard Rear @ 540 RPM and Mid @ 2100 RPM std.
- Control: Independent
- Clutch: Wet disk
- Brake (for Mid and Rear PTO): Wet disk
Fluid Capacities
- Fuel Tank, gal. (l): 6.1 (23)
- Cooling system (includes coolant bottle), qt. (l): 3.4 (3.2)
- Crankcase with filter, qt. (l): 3.4 (3.2)
- Transmission and Hydraulic System, gal. (l) hydrostatic: 2.6 (10.0)
- Front Axle Gearcase (MFWD axle), gal. (l): 3.6 (3.4)
Final Drive
- Type: Spur Gear
- Engage On-the-Go Rear Differential Lock: Yes
Operator Station
- Rollover Protective Structure: OSHA, SAE, ASAE
- Rigid - Foldable - Telescopic: Foldable
- Platform - Flat/Straddle: Flat
- Gear Shift Location - Console/Floor: Left hand Side
MFWD Dimensions
- Wheelbase, in. (mm): 63.0 (1600)
- Front Tread Range, in. (mm): 31.1 (790)
- Front Axle Clearance, in. (mm): 12.5 (318.4)
- Turning Radius w/Brakes, ft. (m): 6.7 (2.04)
- Turning Radius w/o Brakes, ft. (m): 7.7 (2.34)
- Unballasted Operating Weight, lb. (kg): 1660 (753)
- Approx. Ship Wgt, lb. (kg) Open; Cab: 1660 (753); N/A
Standard Tires
- MFWD Front: 23x8.5-12 R4
- MFWD Rear: 31x12-16.5 R4
Miscellaneous
- Underhood Muffler: Yes
- Joystick SCV Control: Yes
- Inboard Planetary: No
- Axle Type: Flanged
- Brakes - Type and Control: Wet disk
Engine
Engine Manufacturer | Yanmer 3TNV76 |
Engine Type | 3-Cylinder, Liquid Cooled, Diesel |
Horsepower | 24.1 hp (17.7 kW) |
PTO HP | 18 hp (13.4 kW) |
Rated RPM | 3000 rpm |
Bore and Stroke | 76 x 82 mm (2.99" x 3.23") |
Specifications
Wheelbase | 63 in. (1600 mm) |
Weight | 1660 lbs. (753 kg) |
Ground Clearance | 12.5 in. (318.4 mm) |
Tire Size | Front: 23 x 8.5 - 1 R4, Rear: 31 x 12 - 16.5 R4 |
General
Fuel System | Direct Injection |
Fuel Capacity | 6.1 gal. (23 l) |
Transmission | Hydrostatic - 2 Range |
Brakes | Wet Disk |
Hydraulics | Open Center, 2421 Max psi |
Drive Type | Spur Gear |
Shopping Tools
Quote by Phone

2008 John Deere 2320 4WD
$15,900.00
(717) 517-2626
Ruhl's Repair
119 Foreman Rd |
Elizabethtown
PA
17022
United States
- Hours Open Close
- Mon - Fri: 7:30 a.m. 5:00 p.m.
- Sat: 8:00 a.m. 12:00 p.m.
- Sun: Closed